User Manual Q&AAnswer
Apr 07, 2025 - 11:11 AM
To set the DMX address for the Divine 160, follow these steps:
1. Access the fixture's menu by using the control buttons on the fixture.
2. Use the UP/DOWN buttons to navigate to the "Fixture Address" menu.
3. Press the ENTER button to enter the menu.
4. Use the UP/DOWN buttons to select the "dM.Ad." submenu.
5. Press the ENTER button to enter the submenu.
6. Use the UP/DOWN buttons to select the desired DMX start address.
7. Press the ENTER button to confirm the choice.
Note: After switching on the fixture, the display will show the current DMX address. If there is no DMX data received, the display will flash the set address.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment