User Manual Q&AAnswer
Apr 07, 2025 - 11:06 AM
To install the PHILIPS LL212X CoreLine Trunking Gen2 LED Light, please follow these steps:
1. Before installation, ensure that water does not enter the luminaire, both during installation and while in use.
2. Make sure to use the appropriate cable thickness for the inrush current. Refer to the values provided in the instruction manual, where the left values are for 1.5 mm thick cables and the right values are for 2.5 mm thick cables.
3. During installation or maintenance, use static-free gloves to avoid leaving marks on the luminaire.
4. To clean the luminaire, use a microfiber cloth for dust and a cleaner for synthetic materials with antistatic properties for fingerprints and other spots.
5. Avoid staring directly into the LED light beam.
6. Remove the protective foil from the optical parts after installation to prevent scratches and dirt.
7. The luminaire should be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or national requirements.
8. The light source of this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire should be replaced.
9. The driver insulation is basic according to IEC 61847-1.
10. Before servicing, always disconnect the luminaire.
11. Only the manufacturer, their service agent, or a similar qualified person should replace the light source, control gear, or external flexible cable contained in the luminaire.
Please refer to the instruction manual for any additional information or specific installation details.
Add New Comment