User Manual Q&AAnswer
Apr 07, 2025 - 10:44 AM
To install the Style Selections 45717PHXLG 9.06-in L x 0.98-in W x 6.5-in D White Shelf Bracket, please follow the steps below:
1. Start by gathering all the necessary tools and materials for installation. You will need a drill, screws, a level, a pencil, and a measuring tape.
2. Determine the desired height and location for your shelf. Use a level to ensure that the bracket will be installed straight.
3. Mark the location for the first bracket by placing it against the wall at the desired height. Use a pencil to mark the xxxx holes on the wall through the bracket's mounting holes.
4. Pre-drill pilot holes at the marked locations on the wall using an appropriate drill bit size for the screws you will be using. This will prevent the wall from splitting when you insert the screws.
5. Align the bracket with the pre-drilled holes and secure it to the wall using screws. Make sure the bracket is level before fully tightening the screws.
6. Repeat the above steps for the second bracket, ensuring that it is aligned with the first bracket and level.
7. Once both brackets are securely attached to the wall, place the shelf on top of the brackets. Ensure that the shelf is centered and level.
8. If necessary, secure the shelf to the brackets using additional screws or mounting hardware provided with the shelf.
9. Double-check the stability and levelness of the shelf before placing any items on it.
Please note that the specific installation instructions may vary slightly depending on the exact model of the Style Selections 45717PHXLG 9.06-in L x 0.98-in W x 6.5-in D White Shelf Bracket. For more detailed instructions and illustrations, refer to the instruction manual that came with the product.
Add New Comment