How do I install the Origin 21 Brass Shelf Bracket? (Origin Brass Shelf Bracket Instruction Manual)

Answer

manuals.plus

Apr 07, 2025 - 10:42 AM


To install the Origin 21 46150BBXLG Brass Shelf Bracket, follow these steps:

1. Gather the necessary tools and materials: 
   - P/H  xxxx , #8 x 1-1/2" (3 pieces)
   - Anchor, M6x30mm (3 pieces)
   - Drill
   - Screwdriver
   - Level
   - Pencil
   - Measuring tape

2. Determine the desired location for the shelf bracket on the wall. Use a measuring tape to ensure proper placement.

3. Mark the positions for the anchor holes on the wall using a pencil. Make sure the marks are level and evenly spaced.

4. Use a drill to create holes at the marked positions. The size of the holes should match the size of the anchors (M6x30mm).

5. Insert the anchors into the drilled holes. Ensure they are flush with the wall surface.

6. Align the shelf bracket with the anchor holes and insert the screws through the bracket holes into the anchors.

7. Use a screwdriver to tighten the screws, securing the bracket to the wall. Ensure the bracket is level and securely attached.

8. Repeat the above steps for any additional shelf brackets, if needed.

9. Once all the brackets are installed, place the shelf on top of the brackets and ensure it is level.

10. Your decorative shelf brackets are now installed and ready to hold your desired items.

Please note that the provided instructions are general guidelines. It is always recommended to refer to the specific instruction manual that came with your product for detailed and accurate installation steps.