User Manual Q&AAnswer
Apr 07, 2025 - 10:14 AM
To determine the correct top and base combination for setting eyelets and embellishments with the We R Memory Keepers WR CADTool Eyelets Incase Pink, you need to refer to the chart provided in the instructions. The chart will guide you in selecting the appropriate combination based on the type of metal embellishment you have chosen. Rotate the block of the tool to the correct position according to the chart. Then, place the eyelet or embellishment in the hole and line up the base block of the tool with the hole of the snap or eyelet. Finally, compress the tool to set the eyelet or embellishment in place.
It is important to note that failure to follow the instructions for usage may result in damage to the tool and will void the manufacturer's warranty. Make sure to set the eyelet in the correct direction, with the spring-loaded post going inside the female end of the eyelet and the base of the eyelet flaring on the bottom (base) of the tool. For more detailed setting instructions, you can refer to the chart provided.
Please be cautious when using the tool and ensure that the top of the eyelet is aligned with the top of the tool and the base of the eyelet is aligned with the base of the tool when compressing the Crop-A-Dile. Failure to follow these instructions may result in damage to the tool and void the warranty.
Add New Comment