User Manual Q&AAnswer
Apr 07, 2025 - 09:10 AM
To insert the micro SD card and SIM card into the Trimble TDC650 GNSS Handheld Meter, follow these steps:
1. Unlock and remove the battery door by sliding the locks to unlock and using the battery door opener tool to open the door.
2. Remove the battery from the device.
3. Insert the micro SD card (optional) and the SIM card into their respective slots.
4. Replace the battery, starting with the right side first.
5. Push the battery lock to the right to the locked position.
6. Replace the battery cover and lock it into place.
7. Connect the power adapter and charge the battery for about 4 hours.
Please refer to the Trimble TDC650 GNSS Handheld Meter User Guide for more detailed instructions and illustrations.
Add New Comment