User Manual Q&AAnswer
Apr 07, 2025 - 09:04 AM
To mount the LUPINE SL F E-Bike Headlight on your bike, follow these steps:
1. Position the upper half of the mount on the left side of the stem.
2. Bring both halves of the mount together.
3. Tighten the xxxx with a maximum torque of 0.5 Nm.
4. Put the o-ring onto the bolt xxxx , then insert both through the hole of the mount. Slide the second o-ring onto the bolt xxxx .
5. xxxx the bolt until you feel the mechanical stop of the lamphead thread.
6. Slightly loosen the xxxx of the mount, position the lamp carefully, and then tighten the xxxx again with a maximum torque of 0.5 Nm.
7. The mount should be positioned near the stem, with the notches of the junction interlocking perfectly. The lamphead should be centered and close to the stem.
Note: If you have a stem with a width greater than 46mm, you will need the optional extension kit (Item No. 5355) which includes a longer bolt xxxx and a fitting spacer.
For visual reference, please refer to the provided images in the instruction manual.
Add New Comment