Answer

Apr 07, 2025 - 08:39 AM
To install the GROTHE ETA 64X Surface Mounted Doorbell, follow these steps:
1. Connection of the Protact push button:
- Strip the wire.
- Put the wire through the seal.
- Connect the wire.
- Unlock the seal.
- Press on the seal.
2. Installation of the surface-mounted shelf plate:
- Align the mounting adapter on the masonry and fix it with the supplied fixing material.
- Note that the round opening on the mounting adapter indicates the position of the bell push button (top or bottom).
- After fixing the mounting adapter, connect the Protact bell push button as described in step 1 and perform a function test.
- Hook the floor plate cover at the side and slip it over the mounting adapter, ensuring that the round opening of the mounting plate is behind the Protact bell push button.
- Secure the tier plate cover laterally with a xxxx , which should be screwed into the mounting adapter. Then, cover the xxxx with a cap.
- Insert the name tag inlay into the provided recess and carefully insert the Plexiglas cover.
3. Electrical connection:
- Lead the wire to the push-button for power supply (8-12V AC/DC, 1.5A).
- Connect the wire to the bell for the bell wire.
- Lead the wire to the LED lighting for ground (8-12V AC/DC, 10mA).
Please refer to the GROTHE ETA 64X Surface Mounted Doorbell Instruction Manual for more detailed instructions and illustrations.
Add New Comment