User Manual Q&AAnswer
Apr 06, 2025 - 07:23 AM
To assemble the Alpina 871125238005 Convection Heater, follow these steps:
1. Lay the convector heater carefully on its side.
2. Place the feet (4) under the convector heater, aligning the xxxx holes correctly.
3. Tighten the screws (4) until they are hand-tight. The feet (7) should now be securely attached.
Note: When deciding on the position of the appliance, refer to the safety advice in the manual and ensure that the air inlet and outlet openings (2 and 5) are always unobstructed.
For more detailed instructions and illustrations, please refer to the "Assembly" section in the instruction manual provided with the product.
Add New Comment