User Manual Q&AAnswer
Apr 06, 2025 - 07:12 AM
1. Battery insertion:
- Turn the outer case in the direction of the arrow and pull it off.
- Insert two AA alkaline batteries into the battery compartment, following the marks indicating the battery poles.
- After inserting the batteries, the display will show the current temperature and symbol.
- Replace the outer case and turn it in the direction of the arrow.
2. Start to use:
- Press and hold the xxxx for 3 seconds before installing the thermostatic head on the valve.
- Wait until the symbol appears and flashes, indicating that the thermostatic head is ready for installation.
- Align the interface nut of the thermostatic valve with the radiator valve and push forward slightly.
- Turn the interface nut clockwise until they are tight (maximum torque is 5 Nm).
- Press the xxxx again, and the symbol will appear.
- After approximately 10 seconds, the symbol will disappear, and the current temperature will be displayed. The installation is complete.
Note: It is recommended to install the thermostatic head in a way that minimizes the effect of the radiator's own heat on the valve.
For more detailed instructions and illustrations, please refer to the TESLA Głowica Smart Style Thermostatic Head User Manual.
Add New Comment