User Manual Q&AAnswer
Apr 06, 2025 - 06:57 AM
To assemble and mount the Moonboon Motor for Baby Hammock, follow these steps:
1. Attach the snap hooks to the motor: Lay the snap hooks flat against the motor and attach them from the side. The narrow end of the snap hooks should point towards the motor. Lock the snap hooks by gently securing the safety lock.
2. Prepare the hanging equipment: If you are using a ceiling hook, door frame clamp, or tripod stand, make sure to set them up according to the instructions provided.
3. Put the motor's parts together: Follow the instructions on page 5 of the user manual to assemble the motor's parts.
4. Hang the motor: Use the upper snap hook to hang the motor. Feed the power cable into the small hole at the top of the motor. Ensure that the power cord is kept away from the motor and the hammock.
5. Hang the spring and hammock: Hang the spring and then the hammock in the snap hook under the motor. Make sure the snap hooks are working and close properly.
6. Wind the nylon string: Take the nylon string coming out of the bottom of the motor and wind it around the fabric at the top of the hammock. Fasten the S-hook around the string to secure it in place.
7. Turn on the power: Once the hammock and nylon string are in place, turn on the power. Refer to the sections on HEIGHT and WEIGHT in the manual for important guidelines regarding the weight and height of the child.
Please note: It is important to read the user manual thoroughly and regularly perform the height and weight tests to ensure the safe operation of the hammock motor.
Add New Comment