User Manual Q&AAnswer
Apr 05, 2025 - 01:08 PM
To adjust the length of the positioning belt, follow these steps:
1. Loosen or tighten the unsecured belt end on each side of the buckle.
2. Both sides of the belt should be of equal length.
3. The fit must be snug, but not so tight that comfort or breathing is compromised.
4. You should be able to slide your open hand between the belt and the wheelchair user.
Please note that it is important to ensure the positioning belt is properly adjusted and securely installed before use. Refer to step 3 in the installation instructions for more information.
Add New Comment