User Manual Q&AAnswer
Apr 05, 2025 - 12:56 PM
The installation process for the HIKVISION DS-2CE12KF3T-PIRXO 3K 4K ColorVu Bullet and Turret Camera depends on the type of camera and mounting option you choose. Here are the general steps for installation:
1. Before you start, make sure the camera is in good condition and all assembly parts are included. Also, ensure that all related equipment is powered off during the installation.
2. Determine the installation location and paste the drill template provided in the package to the desired spot on the wall or ceiling.
3. If you are installing the camera on a cement surface, drill the xxxx holes with a 5.5 mm drill and insert the supplied wall plugs.
4. If necessary, drill a cable hole for routing the cables through the wall or ceiling.
5. Depending on the type of camera and mounting option, follow these steps:
- For ceiling/wall mounting without a junction box:
- Secure the camera to the ceiling or wall using the supplied screws.
- Connect the power cord and video cable to the camera.
- Power on the camera and adjust the view angle as needed.
- For ceiling/wall mounting with a junction box:
- Purchase a junction box in advance.
- Follow the specific steps provided in the manual for your camera model to install the junction box and connect the camera to it.
- Route the cables through the cable hole of the junction box and connect them.
- Secure the junction box cover on its body.
- Adjust the view angle of the camera as needed.
- For ceiling mounting with a junction box:
- Purchase a junction box in advance.
- Follow the specific steps provided in the manual for your camera model to install the junction box on the ceiling and connect the camera to it.
- Route the cables through the cable hole of the junction box.
- Adjust the view angle of the camera as needed.
- For wall mounting:
- Purchase a wall mount in advance.
- Drill xxxx holes in the wall according to the provided template.
- Use expansion bolts to fix the wall mount onto the wall.
- Fix the installation plate onto the wall mount using screws.
- Attach the camera to the installation plate.
- Adjust the view angle of the camera as needed.
6. Once the camera is installed, connect it to a TVI DVR and a monitor to view the image.
Please note that these are general installation steps, and it's important to refer to the specific instructions provided in the HIKVISION DS-2CE12KF3T-PIRXO 3K 4K ColorVu Bullet and Turret Camera user manual for your camera model.
Add New Comment