Answer

Apr 05, 2025 - 12:55 PM
To install the V-TAC VT-6029 LED Waterproof Lamp, please follow these steps:
1. Turn off the power before starting the installation to ensure safety.
2. The installation must be performed by a qualified electrician.
3. Unlock the clips and open the diffuser to replace or install the tubes.
4. Mount the lamp using the provided mounting brackets according to the installation diagram in the manual.
5. Use rubber cable 3x1mm or 3x1.5mm for outdoor mounting.
6. Connect the wiring input on one side of the housing using the available PG11 waterproof cable gland.
Please refer to the manual for more detailed instructions and illustrations on lamp installation.
If you have any further questions or issues with the product, you can contact V-TAC support at support@v-tac.eu or reach out to your local dealer or distributor.
Add New Comment