User Manual Q&AAnswer
Apr 05, 2025 - 12:52 PM
To switch the camera's signal, follow these steps:
1. Remove the camera's dome cover to access the joystick and OSD control on the base of the camera.
2. Use the OSD Switch to switch the camera's signal.
3. To switch to HD-TVI mode, press the OSD joystick to the left for 5 seconds.
4. To switch to HD-Analog mode, press the OSD joystick to the right for 5 seconds.
5. To switch to CVBS mode, press the OSD joystick up for 5 seconds.
6. To switch to HD-CVI mode, press the OSD joystick down for 5 seconds.
Please refer to the user manual for more detailed instructions and illustrations on switching the camera's signal.
Add New Comment