How do I install the Panasonic Low Ceiling Mount Bracket on a concrete ceiling? (Panasonic Low Ceiling Mount Bracket Instruction Manual)

Answer

manuals.plus

Apr 05, 2025 - 12:48 PM

To install the Panasonic ET-PKD520S Low Ceiling Mount Bracket on a concrete ceiling, follow these steps:

1. Mounting Hole Preparation:
- Drill mounting holes in the concrete ceiling according to the attachment plate diagram.
- Ensure that the sizes of the mounting holes match the specifications provided by the manufacturer of the anchoring nuts or curled plugs.

2. Attaching the Attachment Plate:
- Attach the anchoring nuts or curled plugs to the concrete ceiling and securely fix the four ceiling mount bolts.
- Make sure to follow the installation instructions provided by the manufacturer of the anchoring nuts or curled plugs.
- Check that the concrete ceiling structure can bear the weight of the projector and the ceiling mount bracket.
- Securely attach the attachment plate to the ceiling mount bolts using commercially available flat and spring washers.

3. Installing the Bracket to the Projector:
- Install the angle adjusting bracket to the projector mount bracket that is pre-installed on the projector.
- Use the supplied captive washer screws (M6 x 16) to secure the angle adjusting bracket to the projector mount bracket.

4. Suspending the Projector:
- xxxx two captive washer hex head bolts (M8 × 20) halfway into two opposite side bolt holes in the attachment plate, on the forward side nearest the screen.
- Insert the temporarily fastened captive washer hex head bolts into the hook section of the angle adjusting bracket.
- Tighten the two captive washer hex head bolts securely.
- Secure the angle adjusting bracket to the attachment plate using the supplied two captive washer hex head bolts (M8 × 20).

5. Adjusting the Installation Angle:
- Use the panning adjustment and vertical and horizontal tilt adjustment features of the ceiling mount bracket to align the center of the projector lens perpendicularly to the surface of the projection screen.
- Follow the instructions provided in the manual for adjusting the installation angle based on the specific requirements of your projection setup.

Please note that these instructions are a summary of the installation process. For complete and detailed instructions, refer to the Panasonic ET-PKD520S Low Ceiling Mount Bracket Instruction Manual.