User Manual Q&AAnswer
Apr 05, 2025 - 12:15 PM
To install the FeiyuTech FM1 SCORP Focus Motor on your gimbal, follow these steps:
1. Attach the focus gear strip to the lens focus ring or zoom ring.
2. Attach the fixed bracket to the quick release plate of the gimbal using the provided hexagonal xxxx .
3. Insert the aluminum rod into the fixed bracket and adjust it to the appropriate position. Tighten the thumb xxxx to secure it in place. If needed, remove the lens holder before inserting the rod.
4. Install the lens holder on the fixed bracket as needed.
5. Attach the focus motor to an appropriate position on the fixed bracket. Ensure that the motor gear and gear strip make good contact. Tighten the thumb xxxx to secure it in place.
6. Connect the focus motor power port to an extension port on the fixed plate using the provided cable.
7. After the installation is complete, make sure to balance the gimbal before turning it on.
Please refer to the user guide for visual illustrations and additional information on the installation process.
Add New Comment