User Manual Q&AAnswer
Apr 05, 2025 - 12:12 PM
To configure the LogTag UTRED30-16 Vaccine Monitoring Data Logger using LogTag Analyzer, follow these steps:
1. Download the latest LogTag Analyzer software from the LogTag website by navigating to https://logtagrecorders.com/software/.... Click on the "Go To Downloads Page" button, then click "Download Now" to start the download. Once the download is complete, run or save the file and double-click it to open the Analyzer Setup Wizard. Follow the on-screen prompts to install Analyzer onto your computer, and click "Finish" to exit the Setup Wizard.
2. Make sure no other LogTag software is currently running on your computer before running the Analyzer software.
3. Connect your UTRED30-16 to your computer using the provided USB cable. The USB socket on the device is located on the bottom, protected by a rubber seal.
4. Open LogTag Analyzer on your computer.
5. Click on "Configure" from the "LogTag" menu or click the "Wizard" icon. Select the Channel(s) you wish to log in the "Log channels:" setting.
6. Adjust the logger configuration settings as required. For more information on configuration settings, refer to the "Configuring the UTRED30-16" section in the Product User Guide. You can also press "F1" for help from your keyboard.
7. Click "Next" to upload the configuration settings to the logger.
8. Click "Close" to exit the configuration page.
Note: For configuring the UTRED30-16 dual-sensor models, make sure you have LogTag Analyzer version 3.1.15 onwards.
By following these steps, you will be able to configure your LogTag UTRED30-16 Vaccine Monitoring Data Logger using LogTag Analyzer.
Add New Comment