How do I connect the MOES MS-104D Smart Switch Module to my Wi-Fi network? (MOES Smart Switch Module Instruction Manual)

Answer

manuals.plus

Apr 05, 2025 - 11:40 AM

To connect the MOES MS-104D Smart Switch Module to your Wi-Fi network, please follow these steps:

1. Make sure your smartphone is connected to the same 2.4GHz Wi-Fi network that you want to connect the switch module to.

2. Complete the wiring of the switch module according to the provided wiring instructions and diagrams in the manual.

3. Reset the Wi-Fi code on the switch module by following these steps:
- For rocker light switch: press the switch button for 10 times (ON/OFF cycle for 5 times) until the beep sounds continuously and rapidly as "Di-Di-Di..." for pairing and reset mode.
- For reset light switch: press the switch button for 5 times until the beep sounds continuously and rapidly as "Di-Di-Di..." for pairing and reset mode.
- For switch module: long press the reset button on the module until you hear the beep sounds continuously and rapidly as "Di-Di-Di...".

4. Open the Smart Life App (or Tuya App) on your smartphone and click the "+" button to add a new device.

5. Select "Switch (Wi-Fi)" from the device list and follow the on-screen prompts.

6. Enter your Wi-Fi password when prompted and click "Next" to start the connection process.

7. Wait for the connection to complete. This may take 10-120 seconds depending on your network condition.

8. Once the pairing is done, the switch module will be shown on the app.

Note: It is recommended to keep your smartphone close to the switch module during the configuration process and ensure you have at least 50% Wi-Fi signal strength.

If you encounter any issues during the configuration process, please check the following:
- Make sure the switch module is powered on.
- Ensure your mobile device and switch module are connected to the same 2.4GHz Wi-Fi network.
- Check if your internet connection is stable.
- Verify that the password entered in the app is correct.
- Double-check the wiring to ensure it is correct.

For further assistance, please refer to the "Wi-Fi link method" section in the manual or contact MOES customer support through their official website or social media channels listed in the manual.