User Manual Q&AAnswer
Apr 05, 2025 - 10:48 AM
To install the AXAGON RSS-CD09 2.5 Inch SATA SSD-HDD Optical Disk Drive, please follow these steps:
1. Insert Disk: Start by inserting the disk you want to use (SSD or HDD) into the drive.
2. Fix Disk: Securely fasten the disk in place using the provided screws or mounting brackets. Make sure it is firmly attached to prevent any movement during operation.
3. Set notebook type: If you are using the drive in a notebook, you may need to set the notebook type. Refer to the user manual for instructions on how to do this, as it may vary depending on your specific notebook model.
4. Remove ODD: If you are replacing an existing optical disk drive (ODD) with the AXAGON RSS-CD09, you will need to remove the ODD from your device. Again, refer to the user manual for instructions on how to do this properly.
5. Insert & fix AXAGON ODD caddy: Carefully insert the AXAGON RSS-CD09 drive into the empty ODD slot, aligning it properly. Securely fix the caddy in place using the provided screws or mounting brackets.
For more detailed instructions and illustrations, please refer to the user manual that came with the product. If you encounter any difficulties during the installation process, you can also visit the product support tab on the AXAGON website (www.axagon.eu) for additional information, FAQs, manuals, and drivers. If you still need assistance, you can reach out to AXAGON's technical support team by emailing support@axagon.cz.
Remember, when the product reaches the end of its service life, do not dispose of it in household waste. Instead, take it to a collection point for electrical equipment recycling. Contact your local authorities or the retailer who sold you the product for information on collection and recycling programs in your country.
Please note that the manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions provided. If you have any doubts or intend to use the product in a manner not specified, it is recommended to consult with the manufacturer beforehand. Additionally, avoid using the product in humid or explosive environments and keep it away from flammable substances.
Add New Comment