How do I install the Flexiheat DTC VT 20-041 Water Heater? (Flexiheat Water Heater Instruction Manual)

Answer

manuals.plus

Apr 05, 2025 - 08:00 AM

To install the Flexiheat DTC VT 20-041 Water Heater, follow these steps:

1. Choose the location: Select a suitable location for the water heater based on the geometry of the space and the number of units needed. Consider factors such as cold walls, installation height, and the area to be treated.

2. Mounting: Depending on the installation type (suspended or wall-mounted), you can either mount the unit with or without brackets. If using brackets, ensure they are fixed securely to the wall. If mounting without brackets, follow the specific instructions provided in the manual.

3. Air supply grille mounting: The air supply grille is not mounted on the unit when delivered, allowing you to choose the direction according to your installation. Choose the hydraulic connection and orientate the fins of the double louvers if applicable. Then, put up the air supply grille and secure it with the safety xxxx .

4. Mixing box and accessories mounting (optional): If using additional accessories such as a filter box or mixing box, assemble them according to the instructions provided in the manual before mounting them to the water heater.

5. Hydraulic connection: Connect the water supply to the water heater, ensuring proper water tightness and avoiding any mechanical overloads. Install a drain- xxxx in the highest point of the installation to allow for proper drainage. If using a hydraulic connection kit, follow the provided diagram and ensure water tightness during assembly.

6. Electrical connection: Switch off the power supply before making the electrical connection. The electrical characteristics may vary, so refer to the information on the motor identification plate for the correct wiring. Select the appropriate protection system and power supply cable based on the identification plate.

7. Cooling option (if applicable): The Flexiheat DTC VT 20-041 Water Heater can also be used for cooling. To enable cooling, install a condensate drain pan and a moisture collector. Follow the specific instructions provided in the manual for mounting these accessories.

Please note that these are general installation instructions. For specific details and diagrams, refer to the complete instruction manual provided with the Flexiheat DTC VT 20-041 Water Heater.