Answer

Apr 05, 2025 - 07:29 AM
Installation and wiring of the PHILIPS SU 50 and 52 Digital Ignitors for Maximum Reliability is relatively easy. Here is a step-by-step guide:
1. Ensure that the power supply is turned off before starting the installation process.
2. Identify the series circuit in which you want to install the ignitor. The ignitor is designed to work only in series circuits.
3. Locate the xxxx terminal blocks on the ignitor. These terminal blocks are provided as standard and are used for connecting the ignitor to the circuit.
4. Strip the insulation from the wires of the series circuit and the ignitor. Make sure to strip an appropriate length of insulation to ensure a secure connection.
5. Connect the wires from the series circuit to the corresponding xxxx terminal blocks on the ignitor. Ensure that the connections are tight and secure.
6. Once the wiring is complete, double-check all connections to ensure they are properly made.
7. After confirming the connections, you can now turn on the power supply and test the ignitor.
Please note that it is always recommended to refer to the user manual provided with the product for detailed instructions and safety precautions specific to your model. The manual will also provide any additional information regarding the installation and wiring process.
Add New Comment