User Manual Q&AAnswer
Apr 05, 2025 - 07:20 AM
To install the Day-Brite Fluxstream LED Strip using hanger brackets, follow these steps:
1. Mount the hanger brackets to the structure using #8 screws. You will need a minimum of 2 brackets per luminaire.
2. Once the mounting brackets are secured to the surface, snap the luminaire into the brackets. Make sure the mounting bracket is secured into the reveal of the luminaire. Tighten the mounting bracket with the provided #8-18 x 2" bolt.
3. Secure the LED board to the housing by looping the tether over the "T" lance as shown in Figure 2.
4. For stand-alone installation, bring the customer supply wires into the luminaire through the preferred knockout hole. Make the electrical connection according to the electrical code.
5. For continuous row mounting, refer to the "CONNECTING LUMINAIRES FOR ROW MOUNTING" section. Follow steps A, B, and C for each luminaire. Insert a customer-supplied chase xxxx and lock nut into the knockout hole on each end of the adjoining fixtures.
Please note that these instructions are a summary. For complete and detailed instructions, refer to the Day-Brite Fluxstream LED Strip Instruction Manual provided with the product.
Add New Comment