User Manual Q&AAnswer
Apr 05, 2025 - 07:14 AM
To install the Rizoma CT027 Brake Fluid Reservoir, please follow the steps outlined in the user manual:
Step 1: Install Nozzle
- Begin by installing the nozzle onto the reservoir.
- This step is not described in detail in the manual, but it is likely that the nozzle should be threaded onto the reservoir.
Step 2: Install Fluid Tank Cap
- Before mounting the cap, ensure that the gaskets, tank, and cap are clean and dry.
- Do not use water, alcohol, hydrocarbons, benzene, or paraffin to clean the gaskets.
- Use a dry cloth to clean the gaskets.
- To optimize the sealing of the tank, lubricate the indicated parts with a thin layer of grease.
- Use grease without graphite.
Step 3: Check Oil Level
- After the initial filling, periodically check the oil level in the reservoir.
- Excessive oil level can cause leaks, while insufficient oil level can lead to inefficiency in the hydraulic system.
Please note that this answer is based on the information provided in the user manual for the Rizoma CT027 Brake Fluid Reservoir. It is always recommended to refer to the specific instructions provided by the manufacturer for accurate and safe installation.
Add New Comment