User Manual Q&AAnswer
Apr 05, 2025 - 07:08 AM
To install the Anern SFL02 Solar Flood Light, follow these steps:
1. Before installation, check if the light is working properly. It should have been charged and tested before packaging. You can test it by pressing the AUTO button on the remote control. The light should stay on for more than 12 hours.
2. Use the expansion xxxx to fix the solar panel and solar light on the wall or pole. Make sure to plug the twist after twisting the cap. The battery must be fully charged before use, which usually takes 3-5 rainy days.
3. After installation, the light's 4 red points will flash, indicating that the light is charging. When the flashing stops, it means the light is fully charged. The light will automatically turn on at night and turn off during the day.
Note: The solar light requires sunlight to work. Make sure to install it in a place where it can absorb maximum sunlight. It will not work in places without sunlight or during rainy days.
Add New Comment