User Manual Q&AAnswer
Apr 05, 2025 - 07:00 AM
To install the Sunco Lighting SHOEBOX 150W/200W Parking Lot LED Light, follow these steps:
1. Turn off the circuit breaker that provides power to the light switch.
2. Use a wrench to disassemble the slip fitter fixing base from the lamp holder.
3. Pull the fixture wires through the fixing base as shown in the manual.
4. Tighten the screws to attach the fixing base to the shoebox light fixture.
5. Pull the fixture wires through the lamp holder.
6. Use a wrench to secure the lamp holder to the fixing base.
7. Loosen the four locking bolts on the slip fitter.
8. Connect the supply wires to the fixture wires using wire nuts. Match black to black, white to white, and green to green.
9. Secure the light to the pole by tightening the four locking bolts.
10. Turn on the circuit breaker and test the light.
11. Adjust the angle of the light beam from 0 to 90 degrees as desired.
Please refer to the instruction manual for visual illustrations and additional details on the installation process.
Note: It is important to follow all safety precautions and local regulations during installation.
Add New Comment