User Manual Q&AAnswer
Apr 05, 2025 - 05:40 AM
To install the ACCLAIM LIGHTING IN200701 Light 10 Inch Polished Nickel Convertible Semi-Flush Ceiling Light, follow these steps:
1. Turn off the main power at the circuit breaker before starting the installation to prevent any electrical shock.
2. Remove the fixture and the mounting package from the box and ensure that all parts are present by referring to the illustrations in the installation instructions.
3. Attach the socket assembly (15) to the canopy (13) and flat washer (12), then secure it with the wing nut (11).
4. Thread two machine screws (6) through the mounting plate (7) and secure them with the hex nut (9).
5. Secure the mounting plate (7) to the outlet box (1) using the mounting screws (10).
6. Pull out the outlet wire and ground wire from the outlet box (1) and make the wire connections as follows:
- Connect the ribbed wire (without marking) from the light to the white wire (2) from the power source.
- Connect the smooth wire (without marking) from the light to the black wire (4) from the power source.
- Loop the ground wire (3) to the mounting plate (7) using a ground xxxx (8).
7. Attach the canopy (13) against the outlet box (1) and secure it with the ball nut (14).
8. Install bulbs (not included) into the sockets. Make sure not to exceed the maximum capacity recommended on the sockets.
9. Attach the glass shade (17) to the socket assembly (15) and secure it with the xxxx (16).
Once you have completed these steps, the installation of the ACCLAIM LIGHTING IN200701 Light 10 Inch Polished Nickel Convertible Semi-Flush Ceiling Light is now complete.
If you have any further questions or concerns, you can contact Acclaim Lighting's customer service at 866-845-5451 or email them at service@acclaim-lighting.com. You can also visit their website at www.acclaim-lighting.com for more information.
Add New Comment