User Manual Q&AAnswer
Apr 05, 2025 - 05:31 AM
1. Ensure that you have both the Connex Spot Monitor and an approved stand before proceeding with assembly. It is important to have the correct stand to ensure stability and proper functionality.
2. Start by placing the stand on a flat and stable surface. Make sure there is enough space around the stand for easy access and operation.
3. Locate the mounting plate on the back of the Connex Spot Monitor. It should have pre-drilled holes for attaching it to the stand.
4. Align the mounting plate with the corresponding holes on the stand. Ensure that the plate is securely positioned.
5. Using the provided screws or fasteners, attach the Connex Spot Monitor to the stand. Make sure to tighten the screws properly to ensure stability.
6. Once the monitor is securely attached to the stand, check for any loose connections or wobbling. If necessary, adjust the screws or fasteners to ensure a stable and secure assembly.
7. Finally, double-check the assembly to ensure that the Connex Spot Monitor is properly aligned and securely attached to the stand. Test the stability by gently shaking the monitor to ensure it does not move or wobble excessively.
Note: It is important to refer to the specific instructions provided in the user guide for your particular model of the Connex Spot Monitor and approved stand. The above steps are a general guideline, but there may be slight variations depending on the specific product model. Always consult the user guide for accurate and detailed assembly instructions.
Add New Comment