User Manual Q&AAnswer
Apr 05, 2025 - 05:17 AM
To install the Rizoma EE035 Turn Signal Resistor Kit, please follow the instructions provided in the user manual. Here is a step-by-step guide:
Step 1: Before starting the installation, make sure you have all the components of the kit. Check the part list to ensure completeness.
Step 2: Disconnect the battery of your motorbike before installing the resistors. This is to avoid any damage to the electrical system.
Step 3: For the electrical connections, it is recommended to use Rizoma electric wiring. Refer to the Rizoma catalog or website to choose the correct wiring.
Step 4: Arrange the wires in a way that protects them from splash water and secure them appropriately, such as using wire connectors.
Step 5: Reconnect the motorbike battery and test the turn signal to ensure proper functioning.
Step 6: Align the turn signal as described in the manual.
Step 7: Install the resistors in a way that allows heat to escape effectively. It is important to ensure that other components or persons are safe.
Please note that the manual provides additional warnings and precautions that should be followed during the installation process. It is recommended to read and understand the entire manual before proceeding with the installation. If you have any doubts or concerns, it is advised to seek assistance from an authorized Rizoma dealer.
Add New Comment