User Manual Q&AAnswer
Apr 05, 2025 - 05:09 AM
To connect the LANCOM 1640E VPN Router to your network, follow these steps:
1. WAN interface: Connect the WAN interface of the router to your WAN modem using the provided ethernet cable with the dark green connectors.
2. Ethernet interface: Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH 1 to ETH 3 on the router to your PC or a LAN switch.
3. Configuration interface: If you need to configure the device via the serial interface, you will require a serial configuration cable (available as an accessory).
4. USB interface: The USB interface can be used to connect a USB printer or a USB storage device.
5. Power: Connect the power cable to the device and turn the bayonet connector 90° clockwise until it clicks into place. Only use the supplied power adapter.
Please note the following when setting up the device:
- Ensure that the power plug of the device is freely accessible.
- If the device is placed on a desktop, attach the adhesive rubber footpads.
- Do not place any objects on top of the device.
- Keep the ventilation slots on the side of the device clear of obstruction.
- If wall mounting, use the supplied drilling template.
- For rack installation, use the LANCOM Rack Mount (sold separately).
- Third-party accessories are not supported by the manufacturer.
For more detailed information and instructions, please refer to the LANCOM 1640E VPN Router User Guide provided with the product.
Add New Comment