How do I configure and manage Cisco Wireless Controllers in a Cisco Wireless Solution? (Cisco Wireless Solution Overview User Guide)

Answer

manuals.plus

Apr 05, 2025 - 05:04 AM

To configure and manage , you can use Cisco Prime Infrastructure (PI). Cisco PI is a network management tool that allows you to configure and monitor one or more controllers and associated access points (APs). It provides tools for large-scale monitoring and control of your wireless network.

Here are the steps to configure and manage Cisco Wireless Controllers using Cisco Prime Infrastructure:

1. Install and set up Cisco Prime Infrastructure according to the instructions provided in the Cisco Prime Infrastructure user guide.

2. Once Cisco PI is installed, you can add your Cisco Wireless Controllers to the management inventory. This can be done by discovering the controllers using their IP addresses or by importing them from a file.

3. After the controllers are added, you can configure various settings such as WLAN profiles, security policies, and radio frequency (RF) parameters. These configurations can be applied globally or on a per-controller basis.

4. Cisco PI also provides monitoring capabilities for your wireless network. You can view real-time statistics, performance metrics, and client information for each controller and AP. This helps you identify and troubleshoot any issues that may arise.

5. In addition to configuration and monitoring, Cisco PI allows you to perform firmware upgrades on your controllers and APs. You can schedule and manage these upgrades from the Cisco PI interface.

6. Cisco PI also integrates with other Cisco solutions such as Cisco Identity Services Engine (ISE) and Cisco Connected Mobile Experiences (CMX). This enables advanced policy enforcement and provides presence analytics and guest access capabilities.

For more detailed instructions on how to configure and manage Cisco Wireless Controllers using Cisco Prime Infrastructure, refer to the user guide for Cisco Prime Infrastructure. You can find the user guide and other relevant documentation on the Cisco website at https://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastruc
ture/series.html.