User Manual Q&AAnswer
Apr 04, 2025 - 06:59 AM
To install the PHILIPS ATEX GentleSpace 3 luminaire, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Ensure that the luminaire is installed by a qualified electrician and wired according to the latest IEE regulations or national requirements.
2. The light source contained in the luminaire should only be replaced by the manufacturer, their service agent, or a similar qualified person.
3. During installation or maintenance of the luminaire, it is recommended to use gloves to avoid spots on the cover.
4. To remove dust, use microfiber cloths. For fingerprints and other marks, use a cleaner with antistatic properties.
5. Disconnect the luminaire before servicing.
6. The luminaire has basic insulation between the low voltage supply and control conductors.
7. Storage, installation, use, operation, and maintenance of the product should be performed exactly as instructed in the manual to ensure safe use and maintain warranty entitlement.
8. Bolts with indication of torque strength on the drawing should be tightened using a calibrated torque wrench. Pre-assembled bolts should be retightened to the required torque specification for maximum strength over the lifetime of the luminaire.
Please refer to the detailed instructions in the service manual available via the Signify Service tag apps (Android and iOS) for an overview of all spare parts and further guidance.
Note: This answer is based on the information provided in the PHILIPS ATEX GentleSpace 3 Instruction Manual.
Add New Comment