How do I install the Rizoma Front Turn Signal Adapters and Nuts? (rizoma Front Turn Signal Adapters Nuts User Manual)

Answer

manuals.plus

Apr 04, 2025 - 06:45 AM

To install the Rizoma FR230 Front Turn Signal Adapters and Nuts, please follow the steps outlined in the user manual provided.

Step 1: Before starting the installation, make sure you have all the necessary components included in the kit. The difficulty level and time required for installation do not include the removal of OEM components.

Step 2: It is important to note that the turn signals included in this kit are not compliant with applicable DOT or other Federal Regulations and are intended for off-road use only. Using them on-road could result in accidents, personal injury, or death. Additionally, improper installation could damage the electrical system of the motorcycle and cause a fire. Therefore, it is recommended to disconnect the battery before starting the installation.

Step 3: Carefully read and understand all the instructions provided in the user manual. It is essential to follow these instructions to ensure the correct installation and safe usage of the product. If you have any doubts or questions regarding the installation or use of your Rizoma product, it is recommended to consult your authorized Rizoma dealer for assistance.

Step 4: For correct installation, ensure that all tightening is done after correctly positioning the accessories without restricting the moving parts. This is important to maintain the proper functioning of the product.

Step 5: After installing the Rizoma product, it is crucial to check that all related components of the motorbike, such as brakes, throttle, clutch, lights, and steering, are functioning properly. It is strongly advised to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike. Regular inspection and maintenance of your Rizoma products are necessary. If any leakage, bending, deformation, cracking, chipping, or wear is observed, no matter how slight, it is recommended to have a Rizoma dealer inspect the products before riding again. Never attempt to repair or modify the Rizoma products or their components; always replace them with Rizoma original components.

Step 6: It is important to note that Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed previously. For safety reasons, it is recommended to always contact your Rizoma dealer.

Please refer to the user manual for more detailed instructions, diagrams, and safety warnings specific to the Rizoma FR230 Front Turn Signal Adapters and Nuts.