User Manual Q&AAnswer
Apr 04, 2025 - 06:17 AM
To program the ELSEMA PCR43305R Channel Receiver Board with a PentaFOB® remote, you can follow the Remote to Receiver programming method. Here are the steps:
1. Make sure all switches are "OFF" on the receiver's 12-way dip switch.
2. Press and hold the program button on the receiver.
3. Press the button on the PentaFOB® remote for 2 seconds. The receiver LED will flash and then turn green.
4. Release the button on both the receiver and the remote.
5. Press the button on the PentaFOB® remote to test the receiver output.
This process will program the PentaFOB® remote to the receiver, allowing it to control the receiver's outputs. Make sure to refer to the manual for additional programming methods and options.
Add New Comment