User Manual Q&AAnswer
Apr 04, 2025 - 05:45 AM
To install the FIXED Automatic Car Holder With Wireless Charging, please follow these steps:
1. Unscrew the thread on the bracket and attach the bracket to the leg, then use the nut to fix the head in the position of your choice.
2. Remove the protective film from the suction cup.
3. Stick the suction cup to the dashboard or windscreen of your car and press the lever downwards to apply even more pressure to the suction cup.
4. Plug the USB cable into the charging connector and connect it to the car charger. Note that a car charger with Fast Charge support (9V/2A output) is required for Fast Charge.
5. The LED indication will light up to indicate that the holder is plugged into the power supply.
6. Insert your phone into the holder. The holder will automatically close and secure the phone while starting to charge it. The LED indication will turn off after the phone is inserted.
7. To remove the phone from the holder, gently touch the sensor located on the back of the holder.
Please refer to the user manual for more detailed instructions and illustrations on the installation process.
Add New Comment