User Manual Q&AAnswer
Apr 04, 2025 - 05:34 AM
To connect the GENIO unit to your audio sources and amplifiers, follow these steps:
1. Make sure all devices are turned off or on standby before making any connections.
2. For audio input connections:
- For balanced mono inputs (IN1 and IN2), use XLR combo connectors or Euroblock connectors.
- For unbalanced stereo input (IN3 and IN4), use RCA connectors or a minijack connector.
3. For audio output connections:
- Connect your main output to OUT A and OUT B using Euroblock connectors.
- If you want to transmit the audio signal to another remote GENIO unit, use the TX port with an RJ45 connector and a CAT5 cable or higher.
4. If you need to provide phantom power to microphones connected to inputs 1 and 2, turn on the PHANTOM INPUT 1&2 switch.
5. If you want to activate the remote power supply to another GENIO unit, turn on the REMOTE POWER switch.
6. Once all connections are made, connect the GENIO unit to the external power supply.
For more detailed information and diagrams, refer to the "Cable Connections" and "Function Diagram" sections in the user manual.
Add New Comment