How do I install the PHILIPS LED Hall Light? (Philips LED Hall Light User Guide)

Answer

manuals.plus

Apr 04, 2025 - 05:32 AM


To install the PHILIPS BY480P LED Hall Light, follow these steps:

1. Determine the desired suspension length: The maximum suspension length is 4m, and the minimum suspension length is 40cm.

2. SMT (Standard suspension set): Connect the luminaire to the suspension set, ensuring that the load is supported. The distance between the hooks for BY480P is 225mm, and for BY481P is 240mm.

3. BR (Mounting bracket set): If using the mounting bracket set, follow the instructions provided in the manual for proper installation.

4. Adjustable Beam Optic (NBA): If you want to adjust the beam angle, remove the protection cap and adjust the beam according to your preference. The default beam angle is NB.

5. Aisle orientation for High Rack Optic (HRO): If you have the HRO version of the luminaire, position it in a way that prolonged staring into the luminaire at a distance closer than the indicated value in the table is not expected.

6. DC emergency option: If you have the DC emergency compatible version (PSED, PSED-CLO), note that it has 15% of the maximum light output in emergency mode. The DC operational range is 186-250 VDC.

Please ensure that the installation is carried out by a qualified electrician and in accordance with the latest IEE regulations or national requirements. For further details and specific instructions, refer to the user manual provided with the product.