Answer

Apr 04, 2025 - 05:17 AM
To connect the Lenco LS 500 Record Player to your stereo system, you can use the RCA jacks on the unit. The RCA jacks can be used as both the Phono output jacks and the Line output jacks, depending on the position of the Phono/Line switch.
If you want to connect the LS 500 to the phono input of your stereo system, set the Phono/Line switch to the PHONO position. Connect the Red plug to the Right channel input and the White plug to the Left channel input of your stereo system.
If you want to connect the LS 500 to the line input of your stereo system or to a pair of active speakers, set the Phono/Line switch to the LINE position. Connect the Red plug to the Right channel input and the White plug to the Left channel input of your stereo system or active speakers.
Note: Make sure to connect the LS 500 to the appropriate input on your stereo system to avoid distortion or low volume issues.
Add New Comment