User Manual Q&AAnswer
Apr 04, 2025 - 04:32 AM
There are two options for charging the ICI Titan HD Series High Resolution Titan HD Infrared Camera:
Option 1:
1. While a battery is inside the device, plug the Type-C end of either the Type-C Cable or USB Cable into the Type-C port of the device.
2. Plug the other end of the cable into the proper slot (Type-C or USB) of the power adapter.
3. Plug the power adapter into a 110/120V electrical outlet.
Option 2:
1. Remove the batteries from the device before continuing with this method of charging.
2. Insert the batteries into the battery charging base.
3. Plug the Type-C end of either the Type-C Cable or USB Cable into the back of the battery charging base.
4. Plug the other end of the cable into the proper slot (Type-C or USB) of the power adapter.
5. Plug the power adapter into a 110/120V electrical outlet.
Please note that when the battery is not placed in the battery charging base, the indicator light is blue. The light flashes blue when the battery is placed and charging. When the battery is fully charged, the light is steady blue. Charge the battery for a minimum of 4 hours before using the device. It is recommended to charge the device while it is laid face down on a flat and stable desk or table. Ensure the imager is near room temperature before charging and avoid charging in extremely hot or cold areas. The battery capacity may be decreased if charged in an extreme temperature environment.
Add New Comment