User Manual Q&AAnswer
Apr 04, 2025 - 03:54 AM
To update the firmware on your VSEVEN V7 Interactive Flat Panel (IFP) using a USB drive, you have two options: the IFP Power Button firmware update method and the IFP Admin menu firmware update method. Here are the steps for each method:
IFP Power Button firmware update method:
1. Extract the contents of the downloaded firmware file and move the folder named "upgrade_xxxx" to the root folder of a FAT-formatted USB disk.
2. Insert the USB drive into the front right USB port of the IFP.
3. Power off the IFP by holding down the power button for a few seconds.
4. Push and hold the power button for at least 5 seconds until the button blinks red.
5. The firmware update process will start automatically. It may take 5-10 minutes to complete, and the IFP may reboot multiple times. Please wait until the update is complete before touching anything on the IFP.
IFP Admin menu firmware update method:
1. Extract the contents of the downloaded firmware file and move the folder named "upgrade_xxxx" to the root folder of a FAT-formatted USB disk.
2. Insert the USB drive into the front right USB port of the IFP.
3. Using the IFP remote, press "Input 1 3 7 9" to bring up the Admin DEBUG MENU.
4. In the Admin Debug Menu, navigate to the "UPGRADE" option and select "Upgrade All."
5. The firmware update process will start, and it may take up to 10 minutes to complete. The IFP will reboot during the update. Please do not touch anything on the IFP until the update is finished.
Please note that it is important to wait for the firmware update to complete before interacting with the IFP. Interrupting the update process can cause problems. For more information and support, you can visit the official VSEVEN website at www.v7world.com.
Add New Comment