User Manual Q&AAnswer
Apr 04, 2025 - 03:37 AM
To install the Panasonic ET-MDNHM10 Interface Board to your display device, please follow these steps:
1. Turn off the power of your display device (projector or flat panel display).
2. Remove the slot cover of the display device by rotating the four screws counterclockwise with a Phillips screwdriver. Make sure to hold the slot cover with your hand when removing the fourth xxxx to prevent it from falling.
3. Align the guide groove of the Interface Board with the salient of the slot and insert the bracket firmly all the way in.
4. Tighten and fix the Interface Board to the display device by using the four screws that were removed in Step 2.
Note: It is recommended to ask a qualified technician to install the Interface Board to a projector to prevent any potential malfunction due to static electricity. Consult your dealer for assistance.
Please refer to the "How to install the Interface Board" section on page 7 of the Panasonic ET-MDNHM10 Interface Board Instruction Manual for more detailed instructions and illustrations.
Add New Comment