User Manual Q&AAnswer
Apr 04, 2025 - 03:34 AM
To install the iTECHBC40 40A Intelligent Lithium Battery Charger, follow these steps:
1. Choose a suitable location for mounting the charger. It should be dry, cool, ventilated, and clean. Avoid dusty environments and direct sunlight or heat sources.
2. Ensure that there is at least 60mm of clearance around the charger for adequate airflow. Make sure the cooling fan and ventilation slots are not obstructed.
3. If mounting on a hard surface, such as metal or wood board, use anti-vibration mounts between the charger and the mounting surface.
4. Connect the DC output of the charger to the battery you want to charge. Pay attention to the polarity (RED to Battery +, BLACK to Battery -) to avoid damage.
5. Connect the AC power cable to the AC input socket of the charger.
6. Turn on the 240V AC supply.
7. Turn the Main Switch on the front panel of the charger to the ON position. The charger will start charging the connected battery.
8. When the charging is complete, turn the Main Switch to the OFF position and unplug the AC power cable.
9. Remove the charging cables from the battery.
Please refer to the user guide for more detailed instructions and safety precautions.
Add New Comment