User Manual Q&AAnswer
Apr 04, 2025 - 03:33 AM
To provision the WATTECO 50-70-136 LoRaWAN Network Tester on your LoRaWAN network, follow these steps:
1. Start by obtaining the necessary keys from a secure platform provided by your LoRaWAN network provider.
2. Ensure that the device is powered on. When powered on, the LED will flash green.
3. Use the provided keys to provision the device on your LoRaWAN network. This process may vary depending on your network provider's platform. Refer to their documentation or contact their support for specific instructions.
4. Once the provisioning is successful, the LED on the device will remain green, indicating that it is connected to the LoRaWAN network.
For further assistance or troubleshooting, you can visit the WATTECO support website at https://support.watteco.com/.
Please note that the above instructions are a general guideline, and it is recommended to refer to the user guide or contact the manufacturer's support for specific instructions related to your network and device configuration.
Add New Comment