User Manual Q&AAnswer
Apr 04, 2025 - 03:28 AM
To set the clock on the Solar Bright Industrial AI6006 Exos Home Speaker, follow these steps:
1. Make sure the unit is plugged in and in standby mode (display shows 12:00 flashing).
2. Press and hold the CLOCK SET button on the remote control until the hour digits start blinking on the LED display.
3. Use the ⏮ or ⏭ buttons to adjust the hour. Hold down the buttons for fast reverse/advance setting.
4. Press the CLOCK SET button to confirm and move to the minute digits, which will start blinking.
5. Use the ⏮ or ⏭ buttons to adjust the minute. Hold down the buttons for fast reverse/advance setting.
6. Press the CLOCK SET button to confirm and complete the setting.
7. The display will stop blinking, and the clock is now set.
Note: The PM indicator on the left of the LED display will light up when the hour is set to PM and will be off when the hour is set to AM. The unit will automatically save the settings and exit the time set mode if you do not press the CLOCK SET button within 10 seconds. In case of a power outage, the unit will provide 30 minutes of power to keep the clock settings.
Add New Comment