User Manual Q&AAnswer
Apr 04, 2025 - 03:21 AM
To program the RFSA-11B Switch Unit, follow these steps:
1. Press and hold the programming button on the RFSA-11B Switch Unit for 1 second. The LED on the unit will start flashing at a 1-second interval.
2. On your RF transmitter (controller), select the button that you want to assign the "close" function to. The RF transmitter should be within range of the RFSA-11B Switch Unit.
3. Press the chosen button on the RF transmitter. The RFSA-11B Switch Unit will assign the "close" function to that button automatically. The second position of the control, "switch off," is assigned automatically for a 4-button RF transmitter.
4. Release the programming button on the RFSA-11B Switch Unit. The LED will light up according to the pre-set memory function.
Now, when you press the assigned button on your RF transmitter, the RFSA-11B Switch Unit will close the output contact, turning on the connected appliance or light. Pressing the button again will open the output contact, turning off the appliance or light.
For more detailed instructions and additional programming options, please refer to the RFSA-11B Switch Unit Instruction Manual provided by the manufacturer.
Add New Comment