User Manual Q&AAnswer
Apr 04, 2025 - 03:20 AM
There are a few possible reasons for the decrease in power output from your solar panels. Here are some troubleshooting steps you can take:
1. Check the wiring: Ensure that all connections between the solar panels and the circuit breakers are clean and secure. Make sure the wires are not damaged or frayed.
2. Reboot the charge controller: Switch off all the circuit breakers connected to the charge controller and then switch them back on. Sometimes, the charge controller may auto-detect the wrong voltage setting during the initial startup, and a reboot can fix this issue.
3. Check the charge controller readings: Take clear pictures of the charge controller readings, including the battery voltage, solar panel voltage, and amps. Send these readings to the manufacturer or supplier for further analysis.
4. Consult the inverter manual: If the above steps do not resolve the issue, refer to the manual that came with your inverter for troubleshooting guidance. The manual should provide information on how to check the inverter's voltage settings and any auto shut-off features it may have.
If the problem persists after trying these steps, it is recommended to contact the manufacturer or supplier for further assistance. They will be able to provide more specific guidance based on the product specifications and your installation setup.
Add New Comment