User Manual Q&AAnswer
Apr 04, 2025 - 02:58 AM
To connect two monitors to the TRIPP LITE MTB3-DOCK-03 Thunderbolt 3 Dock, you can use the DisplayPort Multi-Stream Transport (MST) mode. Here are the steps:
1. Connect your Thunderbolt 3-enabled laptop or computer to the Thunderbolt 3 host port on the dock using the included Thunderbolt 3 cable.
2. Connect one monitor to the dock's Thunderbolt 3 output port using a Thunderbolt 3 cable.
3. Connect the second monitor to the dock's DisplayPort connector using a DisplayPort cable.
4. Make sure both monitors are powered on and set to the correct input source.
5. On your computer, go to the display settings and configure the monitors as extended displays or mirror displays, depending on your preference.
Note: The Thunderbolt 3 and DisplayPort ports can be used simultaneously to transmit video in DisplayPort MST mode. Make sure your source computer supports DisplayPort MST mode for both monitors to be recognized as separate displays.
For more detailed instructions and information, please refer to the "Installation" section of the TRIPP LITE MTB3-DOCK-03 Thunderbolt 3 Dock Dual Monitor Display Owner's Manual.
Add New Comment