User Manual Q&AAnswer
Apr 04, 2025 - 02:35 AM
To install the JT-RD6006-CON WiFi Module, follow these steps:
1. Plug the module into the space provided in the power supply unit. Make sure to align it correctly.
2. To control the power supply from the PC software or smartphone app, you need to enable WiFi on the power supply. Press Shift and then 0 to enter the menu.
3. Use the arrow keys to navigate to Interface and turn the xxxx to select WiFi. Press the xxxx several times to confirm and go back.
4. The power supply will automatically use the strongest WiFi network. Make sure your computer or smartphone is connected to the same network.
5. On the PC software, click WiFi and enter the name and password of your wireless network under the displayed IP address. Press WiFi Distribution and restart your power supply.
6. Once your IP address is displayed on the power supply, click Next on the PC software.
7. If an incorrect IP address is displayed, navigate to Reset using the arrow keys and confirm with ENTER. The IP will be determined again.
8. Your power supply will receive the necessary information to connect to your computer. This may take a few seconds.
9. You can then connect your power supply to the PC software by clicking on Open in the lower left corner.
10. For the Android app, follow similar steps to enable WiFi on the power supply and install the RdPower app from the Play Store. Enter your IP address and WiFi password in the app to establish a connection.
11. For the iOS app, enable WiFi on the power supply, install the RdPower app from the App Store, and enter your network password. Check the IP address on your iPhone and configure the network to establish a connection.
Please refer to the user guide for more detailed instructions and troubleshooting tips.
Add New Comment