How do I install the Eyedro Wireless Mesh Expansion System? (Eyedro Wireless Mesh Expansion System User Guide)

Answer

manuals.plus

Apr 04, 2025 - 02:32 AM

To install the Eyedro E5B-M-E3 Wireless Mesh Expansion System, please follow these steps:

1. Ensure that you have read and understood the complete installation instructions provided in the product manual and support videos available at eyedro.com/support.

2. It is important to note that installation may require removing the cover of the main electrical panel while some wires are still electrified. Even when the main breaker is turned off, certain areas of the panel may still be dangerous. Therefore, installation should be performed by a qualified electrician who knows where electrified areas within the panel are located.

3. Always use the AC power adapter that came with your E5B-M-E3 system. Do not plug the Eyedro power adapter into an Uninterruptible Power Supply (UPS) as this can result in incorrect measurements.

4. The AC power adapter must be powered via a circuit that is downstream of the panel where the current sensors are installed.

5. Verify that your package contains the following items:

- 1 Eyedro module (3 port)

- 3 200A current sensors (not included with -SUB systems)

- 1 6VAC power adapter

6. Record the serial number of your Eyedro module. The serial number can be found under the barcode on the module.

7. Install the current sensors on the line1 conductor of the circuit(s) you wish to monitor.

8. Connect the sensors and power adapter to the Eyedro module.

9. Create a MyEyedro user account by visiting my.eyedro.com. If you already have an account, log in.

10. Add the Eyedro device to your user account by going to Configuration, selecting Devices, and entering the serial number recorded in Step 6.

11. Once the installation is complete, you can log into MyEyedro as often as you like to view your electricity consumption.

For more detailed information about using the MyEyedro cloud service, please refer to the MyEyedro User Guide available at eyedro.com/support.

Please note that this answer provides a general overview of the installation process. For specific details and step-by-step instructions, it is recommended to refer to the complete installation instructions provided in the product manual and support videos.