Answer

Apr 04, 2025 - 02:27 AM
To set up the MicroCom 900M Intercom system, follow these steps:
1. Connect a headset to the beltpack. The beltpack supports dual mini and single mini headsets. Dual mini connectors can be inserted in either direction, and single mini connectors can be inserted in either port of the headset connection.
2. Power on the beltpack by pressing and holding the POWER button for three seconds until the screen turns on.
3. Select a Group by pressing and holding the MODE button for three seconds until the "GRP" symbol blinks on the LCD. Use the VOLUME +/- buttons to select a group number from 0-51 (or 0-24 for PMC-900M-AN model). Press the MODE button to save your selection and proceed to ID setting.
Note: Beltpacks must have the same group number to communicate.
4. Select an ID by using the VOLUME +/- buttons when "ID" begins to blink on the LCD. Choose a unique ID number and press and hold the MODE button to save your selection and exit the menu.
Note: One pack must always use the "00" ID and serve as the master pack for proper system function. "MR" designates the master pack on its LCD. Listen-only packs must use the "L" ID, and shared talk beltpacks must use the "Sh" ID.
For more detailed information and additional settings, please refer to the MicroCom 900M Intercom Instruction Manual.
Add New Comment